How To Simulate GPS Movement With Location Spoofer On Tecno Spark 10C?

When you are playing location-based games like Pokemon Go, you might need to simulate GPS movement to catch more Pokemon. To do this, you can use the GPS movement feature of Wondershare Dr.Fone - Virtual Location . This feature allows you to simulate GPS movement between two or multiple spots on the map. Here’s how you can do it:

Part 1: Simulate Movement Along a Route (One-Stop Route)

You can set up a one-stop route when mocking locations fake with Dr.Fone - Virtual Location. This particular feature helps users to set up looping or round trips within a specific location. To perform the steps for simulating movement, look ahead for a better understanding:

Step 1Access One-Stop Route Function

Once you launch Wondershare Dr.Fone - Virtual Location and connect your smartphone successfully, proceed to select the One-Stop Route function from the top-right section. The function is represented by the third icon from the left in the section. While you have already teleported to another location or are using your current location, you can tap anywhere on the map to set your destination location.

Step 2Define Simulation Parameters

Enter a number to define how many times you want to go back and forth, and select whether you want a Round trip or a Loop trip. Drag the slider on the speed option to set how fast you want to walk. Proceed to click Move Here on the bottom to start the movement simulation.

Step 3Start Simulation Movement

The respective simulation starts, and you can see your position is moving on the map with the speed you set. If you wish to hold the simulation, click Pause or tap Clear to revert to your original state.

Part 2: Simulate Movement Along a Route (Multi-Stop Route)

You can try the multi-stop mode if you want to pass by multiple places along a route on the map. Learn how it is done when you are trying to **spoof location on Android/**iOS:

Step 1Start Multi-Stop Route and Set Parameters

Activate the Multi-Stop Route mode from the top-right section next to the One-Stop Route mode. After activating the mode, set multiple spots on the map by clicking your required place. Define the number of trips and speed. Click Start Moving to initiate the process.

Note: Select the spots along a specific road to prevent the game developer from thinking you are cheating.

Step 2View Multi-Stop Route Movement

As the simulation starts, click Pause at any instance where you want to stop the simulation. You can also Clear all settings if required.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

Part 3: Use Joystick for More Flexible GPS Control (Joystick Movement)

Dr.Fone has integrated the joystick feature into the Virtual Location program to spare 90% of the labor for GPS control. You can always find the joystick on the lower left part in teleport mode. And you can also click the joystick button in the upper right (the 5th one) to use the joystick feature.

The joystick, like one-stop route or multi-stop route modes, aims to facilitate GPS movement on the map. But what’s better? The joystick lets you move on the map by changing directions in real time. Here are the two main scenes where you will definitely love the joystick.

• Automatic GPS movement: Click the Start button in the middle, and the automatic movement starts. Then just change the directions as you like by 1) clicking the left or right arrows, 2) dragging the spot around the circle, 3) pressing keys A and D on the keyboard, or 4) pressing keys Left and Right on the keyboard.
• Manual GPS movement: Move forward by constantly clicking the Up arrow in the program and long-pressing the key W or Up on the keyboard. Reverse by constantly clicking the Down arrow, or long-pressing the key S or Down on the keyboard. You can also tweak the directions using the four ways above before moving forward or reverse.

iSpoofer is not working On Tecno Spark 10C? Fixed

Pokemon Go is one of the most appreciated games across the world. Yes, it has been banned in a few regions because of the controversial concept of the entire game but that’s one of the reasons why people turned to spoofer apps. While wanting to catch more Pokemon is the main reason for location spoofing, to evade the boundary barriers of the game is one more reason.

However, if you have checked recently, iSpoofer has gone - MIA. You don’t find relevant sources to download the application and you don’t see your desperate attempts bringing any fruitful results. Does this mean that the good old days of iSpoofer’s popularity are over? Do we have to find an alternative or there are chances we might get the location changer back?

You will find the answers to all these questions in the clearly guided write-up below and yes, it i applicable for both Android and iOS users.

Part 1 - Does iSpoofer Still Work. Why?

If you have encountered the iSpoofer not working problem, then you are among the several Pokemon Enthusiasts who have been desperately waiting for an update. But the sad news is we never know if it will knock on our doors or not. The app still remains - non-functional. If you have the older version on your phone - uninstalled - and just lying there, you will notice that you will get a maintenance message saying that the app is under ‘maintanence’.

Your search through several blogs will tell that the app is going through some changes and might come back soon. But this may not be the case. Everything that goes around in the gaming world is to draw some recognition and revenue. iSpoofer has already gained its popularity among the gamers and revenue was coming in strongly - until the inevitable happened.

One of the main reasons for iSpoofer Pogo not working is its ban by the makers of Pokemon Go. Niantic is very particular about the rules that it had laid down for the players. One of them is a strict no to use any third-party apps while playing the game.

iSpoofer not only changes the way you play the game but also defies the very concept of how the game should be perceived. You have to ‘Go’ out of the house. So, when Niantic banned the app, iSpoofer lost its very loyal customers. The main target audience were the players of Pokemon Go so you can expect how hard of an impact the loss must have brought to the revenue of iSpoofer.

So, the wise and safest option they had is to pull out and give it some time. It looks like Nianticis in no mood to give a nod to the Spoofing app (isn’t that obvious?) so iSpoofer Pokemon Go not working will remain to be a problem for a while.

Epubor Audible Converter for Mac： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

There were high expectations that iSpoofer will revive back during 2020, owing to everyone staying home and being in desperate need of such spoofing apps but the audience only met with silence from their end. So, there are high chances that the very useful location spoofing app may not be around for a while at least.

Nero Burning ROM:
The ultimate burning program for all your needs!

Part 2 - How can I spoof on iOS safely?

If there is someone who is very disappointed with iSpoofer going off of the chart, then it must be the iPhone users. iOS doesn’t provide diverse options to do something as ‘adventurous’ as changing the location on the Tecno Spark 10C device. You have very little apps to choose from the play store.

If you are facing the iSpoofer iOS not working problem, then you can adopt one of the listed ways -

VPNs - This doesn’t imply that every VPN that is on the internet will help you spoof your location. There are certain blessed ones that come with an in-built location spoofing option that makes the job easier. If I have to name one - then you can use Surfshark. It can sustain you as long as you do not change your location too obnoxiously that the makers can detect the very quick change from point A to Point B that is humanly impossible. However, even if it is not as effective as iSpoofer, and definitely not an alternative, you at least get to enjoy temporary benefits.

Apps on App Store - This is one of the first things that anyone would do when they are in serious need of a location change. Go to the App Store and search for the ‘Fake GPS Location Changers’. However, you have to resort to the Trial and Error method here. Not all apps are going to work - some will be detected pretty quickly - while the others will simply take up space and nothing else. Until you settle on the suitable one, the search continues.

If you are looking for a sure shot at changing your location without any hassle, then the best suggestion would be to use Dr. Fone’s Virtual Location Changer. WIthin 3-4 steps you can easily change your location to anywhere in the world. This is how you do it -

ZoneAlarm Pro Antivirus + Firewall NextGen

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

It is as simple as that with Dr.Fone - Virtual Location . So, if you are looking for an alternative until iSpoofer comes back for iOS devices then Wonderhare’s Dr.Fone can be a perfect choice.

How To Teleport Your GPS Location On Tecno Spark 10C?

While playing games like Pokemon Go, you are in desperate need of finding more Pokémon. If so, changing your location is a necessity that needs to be figured out. For that, teleporting the GPS location of the Tecno Spark 10C device is the optimal solution. To carry this out, Wondershare Dr.Fone - Virtual Location provides a perfect system for fake locations.

Part 1: Teleport to Anywhere in the World (Teleport Mode)

Note: Once you teleport or move to a virtual place, you can restore to the actual location by restarting the Tecno Spark 10C device. You will see a prompt that reminds you to restart your device to restore the location of the connected device when you close the Virtual Location. Click Restart Device and close the program.

* Dr.Fone Mac version still has the old interface, but it does not affect the use of Dr.Fone function, we will update it as soon as possible.

The Teleport Mode offered in Virtual Location is a great way to change the location of iOS/Android devices. If you wish to show a different location to someone else, the best way is to use this mode on Virtual Location. This can be done by following the steps described below:

Step 1Activate Teleport Mode

Once you have connected your smartphone, continue to select the Teleport Mode option from the top-right section. The particular icon is represented by the first icon from the left in that section.

Step 2Add Location To Teleport

After activating Teleport Mode, click the search bar on the top-left to type in the location where you want to shift. After adding the location, hit Enter to proceed.

Note: If you can’t find your current location when searching spots on the map, you can click the Current Virtual Location icon on the right sidebar to show your current virtual location.

Step 3Confirm the Location For Teleporting

You will be directed to the particular, and the map will display it for confirmation. If you are willing to teleport to this specific location, click Move Here.

Step 4Location Successfully Changed On Computer

The location of the smartphone will be instantly changed to the selected location and will be displayed on the map.

Step 5Location Changed On the Smartphone

Open your smartphone and access its maps application. Look into the current location of the Tecno Spark 10C device and verify it to be the same as the changed location on the computer.

Part 2: Instantaneous Movement Between Multiple Points (Jump Teleport Mode)

Wondershare Dr.Fone - Virtual Location also allows the movement of the smartphone device between multiple places with the Jump Teleport Mode. If you want to make your location spoofing look realistic, the steps below will be beneficial:

Step 1Activate Jump Teleport Mode

You will have to first access the Jump Teleport Mode option from the second icon from the left in the top-right section. This can be done after teleporting the location of the smartphone device.

Step 2Set Spots to Jump Teleport

Continue to select the spots you want to pass one by one on the map by simply tapping on them with your mouse. After selecting multiple spots, click the Start Moving button at the bottom of the left panel to start the movement.

Step 3Change Location Between Set Spots

As prescribed, you can propagate amongst the set spots with the Jump Teleport Mode. Use the Next Point and Last Point buttons to shift your location.