How To Simulate GPS Movement With Location Spoofer On Apple iPhone 14?

When you are playing location-based games like Pokemon Go, you might need to simulate GPS movement to catch more Pokemon. To do this, you can use the GPS movement feature of Wondershare Dr.Fone - Virtual Location . This feature allows you to simulate GPS movement between two or multiple spots on the map. Here’s how you can do it:

Part 1: Simulate Movement Along a Route (One-Stop Route)

You can set up a one-stop route when mocking locations fake with Dr.Fone - Virtual Location. This particular feature helps users to set up looping or round trips within a specific location. To perform the steps for simulating movement, look ahead for a better understanding:

Step 1Access One-Stop Route Function

Once you launch Wondershare Dr.Fone - Virtual Location and connect your smartphone successfully, proceed to select the One-Stop Route function from the top-right section. The function is represented by the third icon from the left in the section. While you have already teleported to another location or are using your current location, you can tap anywhere on the map to set your destination location.

Step 2Define Simulation Parameters

Enter a number to define how many times you want to go back and forth, and select whether you want a Round trip or a Loop trip. Drag the slider on the speed option to set how fast you want to walk. Proceed to click Move Here on the bottom to start the movement simulation.

Step 3Start Simulation Movement

The respective simulation starts, and you can see your position is moving on the map with the speed you set. If you wish to hold the simulation, click Pause or tap Clear to revert to your original state.

Part 2: Simulate Movement Along a Route (Multi-Stop Route)

You can try the multi-stop mode if you want to pass by multiple places along a route on the map. Learn how it is done when you are trying to **spoof location on Android/**iOS:

Step 1Start Multi-Stop Route and Set Parameters

Activate the Multi-Stop Route mode from the top-right section next to the One-Stop Route mode. After activating the mode, set multiple spots on the map by clicking your required place. Define the number of trips and speed. Click Start Moving to initiate the process.

Note: Select the spots along a specific road to prevent the game developer from thinking you are cheating.

Step 2View Multi-Stop Route Movement

As the simulation starts, click Pause at any instance where you want to stop the simulation. You can also Clear all settings if required.

Part 3: Use Joystick for More Flexible GPS Control (Joystick Movement)

Dr.Fone has integrated the joystick feature into the Virtual Location program to spare 90% of the labor for GPS control. You can always find the joystick on the lower left part in teleport mode. And you can also click the joystick button in the upper right (the 5th one) to use the joystick feature.

The joystick, like one-stop route or multi-stop route modes, aims to facilitate GPS movement on the map. But what’s better? The joystick lets you move on the map by changing directions in real time. Here are the two main scenes where you will definitely love the joystick.

• Automatic GPS movement: Click the Start button in the middle, and the automatic movement starts. Then just change the directions as you like by 1) clicking the left or right arrows, 2) dragging the spot around the circle, 3) pressing keys A and D on the keyboard, or 4) pressing keys Left and Right on the keyboard.
• Manual GPS movement: Move forward by constantly clicking the Up arrow in the program and long-pressing the key W or Up on the keyboard. Reverse by constantly clicking the Down arrow, or long-pressing the key S or Down on the keyboard. You can also tweak the directions using the four ways above before moving forward or reverse.

Will iSpoofer update On Apple iPhone 14

iSpoofer has been one of the most in-demand applications for changing your location while playing Pokemon Go. For all the right reasons, people wanted to stick to it to make sure that they catch the splendid Pokemon no matter where they are stationed. But the problems started when iSpoofer stopped working and there was no way anyone could continue to use or initiate iSpoofer update. When you open the application, you’d either see an error message, a subtle hint at an apology, or a pop-up that says that the app is under maintenance.

All of them are the alternative ways of saying - ‘We are not available anymore’. But will iSpoofer be back in the year 2021? Can we expect to revive our Pokemon catching abilities with the iSpoofer update? Even if it comes back, will it be available for Android and iPhone users? If not - then do we have any other application that we can use for this purpose? To get answers to all these questions, you have to continue to read this space.

Part 1: Why Can’t I update iSpoofer?

To put it very simple and upfront - The reason why you are unable to update iSpoofer is that it has been shut down. You can no longer use the existing application on the phone or download it from their website. Initially, when the app was down, people thought it could have been a Pogo update that is causing the error. So, they uninstalled the app and tried to download it again from the official website of the iSpoofer app. To their disappointment, the error message showed up even then. It took a while for everyone to accept that the application was no longer available and their desperate attempts to get it to work went in vain.

Undoubtedly, iSpoofer was a ‘game’ changer in the literal sense. You didn’t have to move from your place, you can catch some rare Pokemon and you get additional points for being the active wanderer. It’s of course a ‘cheat route’ to play the game and it has finally come to the notice of Niantic that a third-party app is being used to play the game.

Now that didn’t go down well with the makers. The whole essence of Pokemon Go is to ‘Go Out’ from the house to explore the presence of Pokemons in the surroundings. So, having a third-party application is going to change a lot of things. Pokemon blacklisted the app.

The main target users for iSpoofer were the Pokemon Go players. With them gone, the revenue and usage of the app have reduced to a great extent and the creators have decided to pull the app out. And that is why you will no longer find a new version of iSpoofer that will be compatible with the game. The older version has anyway been blacklisted and won’t be of any use for the players and no iSpoofer update information so far

Even in 2021, there is no guarantee that the app will be back so it’s better to not keep the hopes up. The major business for the app could have been in 2020 when the world stayed home. However, if everyone was unable to download and update the app in the year 2020, there are very bleak chances of having it back in 2021.

Part 2: Is there a good alternative for iSpoofer?

There are quite a few ways to spoof your location in the Pokemon Go Game but then they narrow down to even smaller numbers when we start searching for the ‘reliable’ options. So, here are a few ways you can find a good alternative for iSpoofer.

VPNs - There are certain VPNs that offer in-built location spoofing features that might come in handy for playing games like Pokemon Go. They change your location on the rest of the internet so it might be a little tricky for the makers to catch the foul play.

Google Play Store Apps - There are certain applications you will find on Google Play Store or even the App store that offer ‘Fake GPS’ changes. You simply have to search for ‘Fake GPS Location Changers’ and you get some options. Find the one with the best rating and this can work for a while. However, there is no guarantee of when they’ll abandon you.

The most reliable option that you can go for is using - Dr. Fone. It is Wondershare’s master app that changes your location on the world map, the very same will reflect on all your devices, social media accounts, and internet searches. It’s very hard to detect that you’ve used a spoofer. This is how to use it -

Step 1 - You can use the Dr.Fone Location Spoofer for both Android and iPhones. So, starting off, you need to connect your Apple iPhone 14 (the phone) to your system - be it a laptop or a computer. You will be prompted to accept the ‘Terms and Conditions and then click on ‘Get Started’.

Step 2 - Once you are in, then the page will display a map and your location will be clearly mentioned. You need to go to the Teleport Mode you will find on the top right corner of the page. Enter your new location on the map.

Step 3 - You can use the coordinates to get to the location or once the map displays, you can zoom in and move the pointer from one place to another and then click on ‘Move Here’ so that the location will be shifted from the previous one to new.

Step 4 - Now it’s easier to launch Pokemon Go but give it a few minutes before your changed location is completely registered and keep the new location realistic.

As in, you can’t jump from Russia to America in 2 hours, can you?

It’s quite easy to spoof your location for games like Pokemon Go using Dr. Fone and it will even stay undetected if you do it the right way. Also, the whole process to change the location hardly takes a few minutes, so you don’t have to spend time understanding how it all works. While you wait for the iSpoofer update (which may or may not come) you can use this in the meantime.

How to Use Life360 on Windows PC For Apple iPhone 14?

Life360 is an online platform that utilizes geo-location services to help users share their real-time location with friends and family. The app allows people to create a family group and stay connected to each other through features like chatting, sharing location, sending safety alerts, etc.

As of now, you cannot run Life360 on computer as it is only available for Android and iOS. Why? Because as opposed to a PC, one can easily carry their device everywhere! It means whether your kid is stuck in traffic and needs your help or your parents have lost their way back home, Life360 will instantly send you an alert on your device.

However, that doesn’t mean you cannot use Life360 on a PC. While it may seem a bit odd, there are a couple of methods that’ll allow you to get the Life360 app for Windows. In today’s guide, we are going to share some of these methods that’ll help you run the Life360 app on Windows.

So, without wasting another second, let’s dive straight into the guide.

Part 1: Why people seek to use Life360 on PC?

First things first; why would anyone want to use a family locator app like Life360 on their PC? Well, the truth is everyone has their own reason to get Life360 for PC. For instance, let’s say you are in the middle of an important project and don’t want to be bothered by alerts on your smartphone. However, you still don’t want to compromise with the safety of your family members.

In this situation, you can simply run the Life360 app on PC. This will allow you to directly keep track of the whereabouts of family members on your Windows system and you won’t have to constantly check your phone.

Life360 can also be used on a computer when your phone’s battery has completely drained and there’s no power outlet nearby. In this case, you can simply power-on your laptop, start the Life360 app and send your current whereabouts to family members.

Part 2: Is it possible to use Life360 on Windows PC?

Life360 is an extremely useful app for people who are always concerned about their closed ones. The app is basically designed with a vision to keep family members connected and safe. In addition to location sharing, the app also provides exclusive features like crash detection, place alerts, speed alerts, battery monitoring, etc.

The app also makes it easier for parents to monitor their child’s movement. Using the app, you can always know that your kids have safely reached school and back home. For any parent, knowing whether the kids are safe, is one less thing to worry about.

However, as we mentioned earlier, Life360 hasn’t been released for Windows yet. So, there’s no direct way to install and run the app on a Windows PC. While Life360 may release a dedicated Windows software in the future, as of now, you can only run it using the alternative methods.

These methods include:

Part 3: Use Life360 on Windows PC with Android emulator

The first and the most convenient way to run Life360 on computer is to use an Android Emulator. An emulator is basically a software that creates a virtual Android system on your computer. As a result, you’ll be able to run Android apps on your computer.

While there are dozens of Android emulators, Bluestacks seems to be the most popular and user-friendly option among all. Unlike other emulators, Bluestacks is easy to set up and use.

Here’s how you can run Life360 on a computer using Bluestacks Android emulator./

Step 1: Head over to Bluestacks official website and tap the download button.

Step 2: Open the installer and tap the “download” button. This will initiate the download process on your System.

Step 3: Once the installation process completes, Bluestacks will start to boot. Keep in mind that the first boot may take some time, depending on your system configurations.

Step 4: In the home screen, tap the “Google Play Store” icon. You’ll be asked to sign-in with your Google account. Enter the right credentials and log-in to the Google Play Store.

Step 5: In the top search bar, type-in Life360 and tap the “install” button to download the app.

Step 6: Life360 is now installed on your computer. Open the app and enter your login details. You’ll now be able to run Life360 on your PC.

Part 4: Use Life360 by mirroring Android to Windows PC

While running an emulator is a great way to get Life360 on PC, it has its own set of challenges. For instance, running an Android emulator is not easy when you have a low-configuration PC. Emulators like Bluestacks requires high system configuration otherwise they take forever to load.

In this situation, we have another alternative for you to run Life360 on PC. You can simply mirror your Android to your Windows system. Mirroring the Android device will allow you to see its content on the PC itself.

Here’s how you can mirror the Android device on your PC.

Step 1: Make sure that Bluetooth is activated on both devices.

Step 2: On your Windows PC, open “Settings” and select the “Systems” tab.

Step 3: Choose the “Projecting to this PC” option in the left menu-bar and make sure that “Available Everywhere” is selected.

Step 4: If you’re running Android Pie or above on your device, scroll down to open notification drawer and select “Smart View” (or “Cast” in some devices). You’ll see your PC listed here. Tap the button to start Android mirroring.

Step 5: It may take some while for the connection to establish. Once it does, you’ll be able to cast your device screen onto your computer and you’ll be able to run life360 on your system.

Keep in mind that you’ll still require your device to navigate through the content on your computer. Any action that you perform on your device will be replicated on your computer screen as well.

Final Verdict

Life360 is probably among the top family locators for Android users. Apart from its extensive range of features, the app provides a user-friendly interface, which allows it easier for even elders to use the app without any issues. Even though there isn’t a dedicated Life360 software for Windows, you can follow the above-mentioned methods to run the Life360 on PC.

You Might Also Like

Location-based apps

GPS spoof for dating apps

GPS spoof for social apps

Pokemon Go on PC

AR game tricks

Change Phone GPS Location Easily

• ● Teleport GPS location to anywhere
• ● Play AR games without moving
• ● Spoof Location on the popular Apps

Try Now

Also read: