How to Fix Life360 Shows Wrong Location On Motorola Moto G24?

Life360, the app for family and friends, allows you to see where your loved ones are when you open the app. The app shows the current location of your contacts and will tell you the last time they were seen and if they are in an emergency.

However, there’s a good chance that you’ve seen this message multiple times: “Your phone is missing from Life360. Please contact your cellular carrier and try again”. This message indicates that your phone is not connected to the internet.

As a result, your contacts, photos, and messages are not showing. Life360 may be using cellular data instead of Wi-Fi, but it’s not certain. To avoid this, let us read what we should know.

Part 1: Why is Life360 Location Wrong?

Interference From Nearby Devices/Networks

In some cases, Life360 may not be able to determine the location of your device because it is being interfered with by other nearby devices or networks. For example, if you have an iPhone or iPad, it may be using the same cell tower as your Motorola Moto G24.

The Life360 app has to use the closest available cell tower to determine your location. So if another device uses the closest tower, Life360 will use that instead.

Poor Signal

A poor signal in a particular region, particularly if you’re commuting, is the most common cause of Life360’s incorrect location. When your phone is in a poor signal area, the app will use the internet instead of cellular data to determine the location of your contacts.

Therefore, it is important to keep an eye on the network lines to determine whether or not this is indeed the source of the problem that prevents your Life360 from being found.

To get more information about how often does life360 update location, read about the Life360: Learn How Everything Works!

Part 2: How to Fix Life360 Shows Wrong Location Issue?

There are several ways to fix the Life360app problems that life360 not updating its location. Let’s check them out one by one.

Method 1: Review the Internet settings

The weak internet access contributes to the location display’s unreliability in life 360. If you notice that life360 is displaying the wrong location, you should examine your Internet connection settings to prevent life360 from displaying an inaccurate location.

Switch off the option that saves power and then turn on the wireless Internet connection.

You may turn off your smartphone’s power-saving mode by heading to the status bar and selecting the appropriate option.

Please note that this is just for Android users. Also, do not forget to consider that your Android smartphone’s settings may vary from those listed below.

The “switch off low power mode” option may be found in the “Settings”> “Battery” menu on an iOS device.

Android users should also follow this procedure if life360 displays an incorrect location. For battery conservation, numerous programs are disabled when the low power state is engaged.

Method 2: Double-check Your Current Location in the Settings

If life360 shows the incorrect location, the smartphone’s location services significantly come into play. The location settings must be activated to prevent the life360 location issue, and the current program must be updated accordingly.

Scrolling horizontally on the status bar on an Android device is all that is required for consumers to visit the website. Of course, you can also run the software in the background, which may be accomplished in a variety of straightforward but distinct ways based on the Motorola Moto G24 device’s model.

You may access the Background App Refresh function by going to the settings menu on your iOS device and selecting “Settings,” followed by “General,” and then selecting “Background App Refresh.” Next, launch the location services function by navigating to “Settings”> “Privacy”> “location services” and selecting “Location Services” from the drop-down menu.

After that, touch on the symbol that represents Life360, as shown below; this will take you to a screen where you may change “Allow Location Access” to “Always” and “Enable Precise Location.”

Method 3: Connecting One Device at a Time

Only one device may be used to sign in to the Life 360 app at a time. To prevent the life360 false location problem, log out of all other devices and use just one. When many devices are logged into Life 360 simultaneously, the user’s location might be incorrectly determined.

If you want reliable results, you must be logged in from the same device. If you use numerous devices simultaneously to log in to Life360, it will report incorrect location errors for each one. Therefore, it is possible to get inaccurate data. Use a single device to log into life360 to prevent the issue of a wrong location showing up.

Click here

Part 3: How to Keep Your Location on Life360 in One Place?

Two of the most important and easy ways to keep your location on life360 in one place are:

1. Stopping both Wi-Fi and Cellular Data Transmissions

If you disconnect from the internet, Life360 will no longer work, and your last known position will be shown.

Because all other applications are disconnected, this solution has a significant drawback: it prevents alerts, instant messengers, and other applications from working properly. In addition to the fact that you’re unable to use the internet, people in your circle will notice something wrong. In addition, it may not be adequate to fake your location.

Those with an iPhone have the advantage of being able to disable the usage of cellular data directly inside the application’s settings. However, those with an Android device will need to resort to other approaches.

iPhone users may access the Cellular setting by going to the Settings app and tapping on it. This will switch off the cellular data for the Life360 app. Turn off Life360 by swiping the switch to the off position mentioned above. Life360 will not be able to provide an accurate location report for you so long as there is no Wi-Fi access.

Advantages:

• You can use only one device to connect to the internet.
• No need to manually switch between apps.
• You can easily manage all your data.

Disadvantages:

• You cannot use other devices at the same time.
• If you lose the connection, you need to reconnect.

2. Faking Your Location

It seems like everyone has their own way to try and fiddle with their location in real life. Some may use satellite images or even old maps and coordinates, while others will buy old phones and ship them to a random location. Whatever your method is, it’s probably not the best one out there.

However, a fast but secure option is the use of Dr.Fone - Virtual Location , which is the best virtual location application right now. You canuse it to change your location to any place on earth.

One of Wondershare’s most popular products, Dr. Fone, is a data management and recovery tool. It is compatible with both iOS and Android smartphones, and it comes packaged with a wide variety of control toolkits.

When it comes to faking a location on iOS devices, Dr. Fone- Virtual Location (iOS) is one of the most effective solutions currently available on the market. It is possible to use it to teleport the iOS device to any location in the globe with just one click, and all you have to do is input the address of the place to which you wish to be moved.

Simulating GPS movement from one place to another or along a predetermined course is also possible by simply picking locations on a map that you want to go through.

Using Dr. Fone-Virtual Location iOS, you can customize your route by selecting how many times you want to go through it and how fast you want to relocate it.

To free yourself from any hassle, consider using a third-party tool instead, such as Dr.Fone, which will make the entire process super easy and accurate.

Advantages:

• The application is easy to install and use.
• It doesn’t require you to go through a lot of settings.

Disadvantages:

• • It is not a mobile application.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Conclusion

Life360 has released a major update for Android and iPhone users, fixing the shows being sent to the wrong location. This has caused many problems for many users and is a rather annoying problem to fix. However, you can get help from Dr.Fone - Virtual Location (iOS/Android) application which is an absolute fix to all of your problems.

How To Simulate GPS Movement With Location Spoofer On Motorola Moto G24?

When you are playing location-based games like Pokemon Go, you might need to simulate GPS movement to catch more Pokemon. To do this, you can use the GPS movement feature of Wondershare Dr.Fone - Virtual Location . This feature allows you to simulate GPS movement between two or multiple spots on the map. Here’s how you can do it:

Part 1: Simulate Movement Along a Route (One-Stop Route)

You can set up a one-stop route when mocking locations fake with Dr.Fone - Virtual Location. This particular feature helps users to set up looping or round trips within a specific location. To perform the steps for simulating movement, look ahead for a better understanding:

Step 1Access One-Stop Route Function

Once you launch Wondershare Dr.Fone - Virtual Location and connect your smartphone successfully, proceed to select the One-Stop Route function from the top-right section. The function is represented by the third icon from the left in the section. While you have already teleported to another location or are using your current location, you can tap anywhere on the map to set your destination location.

Step 2Define Simulation Parameters

Enter a number to define how many times you want to go back and forth, and select whether you want a Round trip or a Loop trip. Drag the slider on the speed option to set how fast you want to walk. Proceed to click Move Here on the bottom to start the movement simulation.

Step 3Start Simulation Movement

The respective simulation starts, and you can see your position is moving on the map with the speed you set. If you wish to hold the simulation, click Pause or tap Clear to revert to your original state.

Part 2: Simulate Movement Along a Route (Multi-Stop Route)

You can try the multi-stop mode if you want to pass by multiple places along a route on the map. Learn how it is done when you are trying to **spoof location on Android/**iOS:

Step 1Start Multi-Stop Route and Set Parameters

Activate the Multi-Stop Route mode from the top-right section next to the One-Stop Route mode. After activating the mode, set multiple spots on the map by clicking your required place. Define the number of trips and speed. Click Start Moving to initiate the process.

Note: Select the spots along a specific road to prevent the game developer from thinking you are cheating.

Step 2View Multi-Stop Route Movement

As the simulation starts, click Pause at any instance where you want to stop the simulation. You can also Clear all settings if required.

Part 3: Use Joystick for More Flexible GPS Control (Joystick Movement)

Dr.Fone has integrated the joystick feature into the Virtual Location program to spare 90% of the labor for GPS control. You can always find the joystick on the lower left part in teleport mode. And you can also click the joystick button in the upper right (the 5th one) to use the joystick feature.

The joystick, like one-stop route or multi-stop route modes, aims to facilitate GPS movement on the map. But what’s better? The joystick lets you move on the map by changing directions in real time. Here are the two main scenes where you will definitely love the joystick.

• Automatic GPS movement: Click the Start button in the middle, and the automatic movement starts. Then just change the directions as you like by 1) clicking the left or right arrows, 2) dragging the spot around the circle, 3) pressing keys A and D on the keyboard, or 4) pressing keys Left and Right on the keyboard.
• Manual GPS movement: Move forward by constantly clicking the Up arrow in the program and long-pressing the key W or Up on the keyboard. Reverse by constantly clicking the Down arrow, or long-pressing the key S or Down on the keyboard. You can also tweak the directions using the four ways above before moving forward or reverse.

A Detailed VPNa Fake GPS Location Free Review On Motorola Moto G24

As I stumbled upon this query that has been recently posted on a leading online forum, I realized that so many people don’t know about the VPNa Fake GPS app. If you are also an Android user who would like to change your device’s location, then VPNa Fake GPS APK might meet your requirements. Since there are so many location spoofing tools out there, I decided to give VPNa Fake GPS location app a try and have come up with its genuine review here.

Part 1: VPNa Fake GPS Location Free: Features, Pros, Cons, and More

Developed by XdoApp, VPNa Fake GPS is a popular application that can change the location of your Android virtually. Using it, you can spoof your device location to almost anywhere in the world. This would be reflected in almost all the installed gaming, dating, and other apps on your phone automatically.

• You can look for any location on the interface of VPNa Fake GPS by entering keywords (name/address) or the exact coordinates (longitude and latitude) of the place.
• To fake GPS using VPNa, you would be presented with a map-like interface and can easily move the pin around to spoof your location to an exact place.
• Besides that, if there is a location that you change frequently, then you can also mark it as a favorite.
• The VPNa fake GPS location APK would also maintain the record of the past locations that you have spoofed.
• Using VPNa Fake GPS, you can change your location as many times as you want without paying anything.

Pros

• The changed location would be reflected in almost every dating and gaming app.
• The basic version of VPNa Fake GPS is available for free and doesn’t need root access.
• The overall interface of VPNa Fake GPS APK is pretty user-friendly and smooth.

Cons

• At times, some advanced apps (like Pokemon Go) can detect it and might get your account banned.
• While using the free VPNa fake GPS version, you would get in-app ads.
• Sometimes, the location is not spoofed even after consecutive attempts.

Pricing: While you can access the basic version of VPNa Fake GPS for free, you can pay $2.99 for an ad-free experience.

Compatibility: Android 4.4 and newer versions

Play Store Rating: 3.6/5

Important Note

Don’t get confused by the name of VPNa Fake GPS as it is not a VPN, but only a location spoofing solution. If you are looking for a VPN app, then you should consider other options.

Final Verdict

Overall, VPNa Fake GPS location free is worth a try. It is pretty lightweight, easy-to-use, and supports almost all the prominent apps. Since you don’t have to pay anything to use VPNa Fake GPS, you can give it a try, and explore it on your own.

Part 2: How to Use VPNa Fake GPS Location Free to Spoof Your Location?

Now when you know how VPNa fake GPS Location Free works, let’s quickly understand how to use it to change the location on any Android phone.

Step 1: Enable Developer Options on your phone

To set up a mock location app, you need to first enable the Developer Options on your device. To do this, just go to its Settings > About Phone and tap on the “Build Number” feature 7 consecutive times.

Once it is done, go to its Settings > Developer Options and turn on the option to set a mock location on your phone.

Step 2: Make VPNa Fake GPS as the default mock location app

Now, you can just go to the Play Store and download the VPNa Fake GPS Location app on your device. After the app is installed, you can just go to its Developer Options again and set it as a default mock location app.

Step 3: Spoof your Android’s location

That’s it! Whenever you wish to change the location of your device, simply launch VPNa Fake GPS APK. You can enter any location’s address or coordinates in the search bar and wait for it to be loaded on the interface.

Later, you can move the pin around and drop it anywhere you like. Tap on the Start button and confirm your choice to spoof your device’s location.

Part 3: Bonus Tip: How to Spoof an iPhone Location without Jailbreak

While Android users can take the assistance of VPNa Fake GPS, iOS users often find it hard to change their device location. Well, in this case, you can consider Dr.Fone - Virtual Location(iOS) . It is a user-friendly application that can spoof your iPhone location to any other place by entering its address or exact coordinates. Besides that, you can also simulate the movement of your device between different spots.

Step 1: Connect your iPhone and launch the tool

At first, you can just connect your iPhone to your computer and launch the Dr.Fone toolkit. Select the “Virtual Location” feature from its home and click on the “Get Started” button.

Step 2: Look for a location to spoof

The application will automatically detect your device’s location and would display it. To change it, click on the Teleport Mode icon from the top, and enter the address/coordinates of the place in the search bar.

Step 3: Change your iPhone’s location

After entering the target location, the interface would also change. You can move the pin, zoom in/out, and drop it to the designated place. In the end, just click on the “Move Here” button to spoof your iPhone’s location.

This brings us to the end of this detailed VPNa Fake GPS Location Free review. To help you use the VPNa Fake GPS APK, I have listed its features, pros, cons, and even a detailed tutorial. On the other hand, if you are an iPhone user, then you can simply use Dr.Fone - Virtual Location(iOS) and change your device’s location to anywhere you want.

Also read: