Does Airplane Mode Turn off GPS Location On Tecno Spark 10C?

Airplane mode is a feature available on all smartphones and other electronic devices that stops the signal transmissions from the Tecno Spark 10C devices. Also known as flight or airplane mode, this feature will disconnect the wireless functions, including cellular connection, Wi-Fi, and Bluetooth.

The feature’s name says that it was introduced to cut off any radio transmission during the flight to avoid any communication interference. However, the feature must be enabled while taking a flight, and if you need to be disconnected from the signals, you can even use the feature outside the plane.

If you have enabled airplane mode on your Tecno Spark 10C or Android device and think it will also block your GPS location, you are wrong. Know why airplane mode does not turn off GPS location and other ways to avoid getting tracked with or without Airplane Mode.

Part 1: Does Airplane Mode Turn off location?

As we mentioned above, while you put your phone on airplane mode, the cellular radio, Wi-Fi and Bluetooth is disabled, but not the GPS location.

The GPS works on a different technology where the signals are received from the satellite and are not dependent on the network or cellular services. So, when the airplane mode is enabled, the GPS location is not turned off.

Part 2: Can Your Location Be tailed on Airplane Mode?

Yes, if you have not disabled the GPS feature, your location can be tailed on an Airplane mode as the flight mode only disables the cellular connection and Wi-Fi. So, it can be concluded that Airplane Mode is no solution for stopping the GPS tracking on your phone, though there are other workarounds available for this.

Part 3: How to Prevent Phones from Being Tailed?

The GPS feature of your phone, besides assisting you, is also a way any person or third-party app can keep track, which can hamper your privacy and be annoying. So, for privacy or any other reason, if you are looking for ways to prevent your phones from being tailed, check out the solutions for iDevices and Android below.

3.1. How to stop GPS tracking on Tecno Spark 10Cs?

To hide the location on your Tecno Spark 10C and iPad, below listed are the steps.

Step 1. Open the Control Center on your iDevice, iPhone 13 for example. (For iPhone X and above models, swipe down from the top-right, while on other devices, swipe from the bottom of the screen)

Step 2. Enable the Airplane Mode or turn off the Wi-Fi and Cellular icon.

Step 3. Next, you need to disable the GPS radio. On some of the Tecno Spark 10C devices, there is a separate setting for this. Go to Settings > Privacy> Location Services. The list of the apps using the location services will appear. Move the toggle at the Location Services to turn it off.

3.2. How to stop GPS tracking on Android Devices?

The process to turn off GPS location on Android devices may vary from device to device and brand to brand. Still, the commonly used steps for turning off the location are listed below.

Step 1. On your Tecno Spark 10C, swipe down on your screen to open the options list.

Step 2. Search for the Airplane icon and click on it to turn on the Airplane Mode.

Step 3. Next, open the App Drawer and then choose Settings > Location. Turn off the Location.

Part 4: Spoof Location to prevent GPS Tracing without Turning on Airplane Mode

If you are looking for a method that can prevent GPS tracking without turning on Airplane Mode, spoofing your location is a workable solution. To get this task done, you would need a specialized app or a tool, and here we recommend Dr.Fone - Virtual Location as the best option.

Using this excellent tool, you can set any fake location across the globe for your Android or iOS device, which will prevent you from being hacked. The tool works on almost all models and brands of devices and is quick and hassle-free.

Key features of Dr.Fone Virtual Location

• Teleport to any location of your choice and set a fake GPS location.
• Works with all iOS and Android devices,
• Allows simulating GPS movement with the route.
• Works with all location based-apps like Snapchat , Pokemon Go , Bumble , and others.
• Available for download on Windows and Mac.

You can check out this video for further instruction.

Steps to spoof and set fake location on Android or iPhone using Dr. Fone-Virtual Location

Step 1. Download, install and launch the Dr. Fone software on your Windows or Mac system.

Step 2. On the leading software, tap on the Virtual Location option and then connect your Tecno Spark 10C or Android device to your system using a USB cable.

Step 3. Click on the Get Start button.

Step 4. The software will open a new window, and your connected device’s actual location will be shown. If the location is not coming correctly, tap on the Center On icon present in the lower-right of the interface.

Step 5. Next, in the upper-right corner, click on the teleport mode icon. Next, enter the desired location at the upper left-hand side that you wish to teleport to. Finally, click on the Go button after entering the site.

Step 6. A pop-up box will appear to click on the Move Here button to set the selected location for the connected device. The place will appear on the app interface and the phone.

Part 5: People Also ask about Airplane Mode

Q1: Can An iPhone Be Traced While off?

No, it cannot be traced when an iPhone or any other phone is switched off. For example, when an iPhone is switched off, its GPS is not activated, and thus it cannot be traced.

Q2: Does Find My iPhone Work on Airplane Mode?

No, the Find My iPhone feature does not work in Airplane mode because the location services need a network connection, and thus in Airplane mode, the Tecno Spark 10C device is offline, and it isn’t easy to track the Tecno Spark 10C device.

Q3: Does airplane mode turn off life360

Life360 is a helpful app for tracking your friends, family, and other people. This app tracks your GPS location and displays it to all the selected members in a circle. When the airplane mode on your device is enabled, the network will be disconnected, and thus Life360 will not be able to update your location to the members in the circle. Therefore, during airplane mode, Life360 will not update your site.

Wrap it up

So, it can be concluded that Airplane Mode disconnects you from the cellular network and Wi-Fi. Therefore, to stop getting traced, you need to disable your location services along with the airplane mode. Using Dr.Fone - Virtual Location is an excellent alternative to stop the GPS location as the software will help you set a fake location, and your actual location will remain hidden from all.

safe & secure

Methods to Change GPS Location On Tecno Spark 10C

The Internet is a vast space and you have a plethora of content on different websites and platforms. You can call it a two-way - give and take relationship when it comes to the dynamics of data exchange between the world wide web and the users.

When you visit websites, they use cookies to track your activities. When you visit a restaurant, the phone detects and saves the GPS in the memory. You click a picture in the Maldives, your phone seeks out geographic points to prepare the right time and date stamps.

You need your GPS to download and use certain apps. Similarly, your GPS might be the reason you are unable to play some games or use some applications. Change GPS Location Tecno Spark 10C and this won’t be a problem for you.

But if you are wondering how can I change my location on my iPhone? These 5 methods will help you get fruitful results.

Part 1: Change GPS Location on Tecno Spark 10C using a Professional PC Program

The PC Programs are entirely Software based and do a tremendous job to spoof Tecno Spark 10C iOS 16 Location . You don’t have to buy any new equipment and you will be operating using your computer.

You can get this done within minutes if you have the right program with you. One of the best options in the market is Wondershare’s Dr.Fone. This is how you use Dr. Fone Virtual Location spoofer for GPS Spoofing iPhone.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Step 1: Go to the official website of Dr.Fone - Virtual Location (iOS) . This is easily available when you google it or you can also follow this link here. Then you can download the executive file, install and then launch the application. Once the home page opens, you will find several options - Opt for ‘Virtual Location’. It is usually at the bottom of the page.

Step 2: Now take your Tecno Spark 10C device and connect it to the computer that has Dr. Fone. Then click on ‘Get Started’.

Step 3: Now, the world map will display on the screen and you can clearly see the coordinates and directions as well. On the top right corner, the third icon is called the ‘Teleport Mode’. Click on that and enter the name of the place in the search box. You can even pinpoint it, if you are sure about the place.

Step 4: If you are completely sure that you got the address right, click on the ‘Move Here’ option. It moves your Pin from your present location to your new virtual location.

If you are looking for a way to change Tecno Spark 10C Location without Jailbreak, then this is one of the safest options for you. Also, you have other additional features like Phone Transfer, and Whatsapp Transfer along with Location spoofing. The application will never go to waste, won’t occupy much of your computer/PC/Laptop’s space and you can get the fake location iOS within minutes.

Part 2: Change GPS Location on Tecno Spark 10C using External Device

You can achieve the iOS Spoof Location using External devices as well. These devices do not cause any inconvenience to you. They are meant to be small, fit into the lightning port of your iPhone, and act as an external source that will spoof the Tecno Spark 10C location and the same will reflect in every app that uses or detects your iPhone’s geographic location.

The best external device to change phone location Tecno Spark 10C is Double Location Dongle. This simple device can be utilized by following the steps below -

Step 1: The Double Location Dongle is a very small, white rectangle that connects to your iPhone’s port. But along with it, you also have to install the Companion app for location spoofing. Once you have both of them ready, connect the Tecno Spark 10C device to your iPhone.

Note: The Companion App is not available on the App store. You have to download it from Double Location’s official website.

Step 2: The next step is to open the Double Location iOS companion app and then settle on the Map Tab.

Step 3: Unlike what we had seen in the Dr. Fone step, we cannot enter the location into any search box. You should move the pin to the location that you want to virtually shift to. Double Location provides some very good options that will help you during gaming. You can change all the appropriate settings and proceed.

Step 4: On the bottom of the screen, Go for the lock position option. Once you do that, there will be a virtual shift in your geographic position and all your apps will register your new coordinates.

Part 3: Change GPS Location on Tecno Spark 10C using XCode

You can change the geolocation Tecno Spark 10C by using your coding expertise as well. That is why XCode exists. This Computer Program lets you change your Location in Tecno Spark 10C by giving some GIT Commands to the PC while your Tecno Spark 10C stays connected to it. By following these steps, you can understand how to do it. But if you’ve never had a liking for programming and coding languages, then you should probably skip this -

Step 1: Download and install XCode from the AppStore, directly to your Mac device. Launch the application.

Step 2: Once you see the XCode window open, Go for the ‘Single View Application’ to start a new Project and go on by clicking on ‘Next’. You can set up a name and details for this particular project.

Step 3: A screen display will appear asking you about your identity. This is where the minimal coding part starts. You need to enter some GIT Commands to continue with the project.

Step 4: Launch and run the terminal on your Mac device and enter these commands - git config –global user.email “[email protected]“ and git config –global user. name “your name”.You need to add your own details in the quoted space and continue to verify your identity.

Step 5: Once you enter the commands, go to the next step and establish the Development Team. Then you can proceed to connect your Tecno Spark 10C device to your Mac device. Use the normal cable to do that.

Step 6: To allow the program to process the Symbol Files, you will have to choose the model of your device. Go to the ‘Build Device’ option and continue as per the prompts. However, make sure that you keep your Tecno Spark 10C unlocked for quick detection by the computer software.

Step 7: Once that is done, you can come back to the actual location spoofing part. Go to the debug Menu > Simulation Location and specify the exact location that you want to virtually shift to. Once you are okay with it, the same will reflect on your Tecno Spark 10C as well.

Part 4: Change GPS location on Tecno Spark 10C using Cydia Location Faker App

Cydia is also based on software applications and changes location in seconds, However, you need to note that you have to jailbreak your phone. If you don’t know how to do it or do not want to take the risk, Cydia’s LocationFaker app may not be the right fit for you. But if you are a jailbreak expert, this is a very comfortable GPS Changer for iPhone.

Step 1: Download the Cyndia LocationFaker app from the official website. LocationFaker8 is available for the iOS 8.0 model.

Step 2: After launching the app, enter the virtual location into the search box.

Step 3: If you are done with choosing the new location, shift the toggle from ‘OFF’ to ‘ON’ at the bottom of the page.

Step 4: Now we can decide which apps can access our new virtual location. At the bottom of the page, you will find an ‘i’ icon. Go click on it and choose the ‘White List’ option. This one will then take you to the app list and you can decide which of them will have access to the phone’s location.

Part 5: Change GPS Location on Tecno Spark 10C using Location Handle

Location Handle is another useful application that you can use to change your location by a few meters or simply go with an automated movement system that changes your location gradually as if you are moving from one place to another. This is how you use it -

Step 1: Download the Location Handle app from the website or App store

Step 2: There are four different types - Normal Mode - teleport to a new location; Offset Mode - Move a few feet away from the present location ; Automatic Mode - Slowly change your location from one point to another, as if walking ; Manual Mode - Change your location using a joystick.

Step 3: Consider the Manual mode, because we want to change location to a far-off place and not necessarily for gaming.

Step 4: Once the Manual mode is activated, the map will be displayed and you can change the pin location. You can enter the location name in the search box.

Step 5: The Joystick will appear on the page and you can use it to shift your location to wherever you want. Once you fix on the location, proceed and the new location will be updated.

Conclusion

We hope you are no longer wondering How to change Location services on Tecno Spark 10C. These 6 methods are very effective and you can always opt for the one that is most comfortable for you. If you want a hassle-free PC program, we have that narrowed down for you. If you are a coding enthusiast, then we’ve listed a method that best fits you. Whatever the reason, with an iOS Fake GPS, life becomes much easier and sometimes even safe on the internet. You can explore beyond the boundaries without moving from your couch!

6 Ways to Change Spotify Location On Your Tecno Spark 10C

Spotify’s booming audio business is proof that people are in love with its services. If you want to listen to your favorite retro song, or you want to discover the latest hits, Spotify has everything. You can also listen to some really good podcasts and album hits. But what most of us don’t know is that your Spotify Location can determine what kind of content you might come across on the platform.

Your playlist suggestions depend on the country and region you are staying in. And in case you are unable to access any particular song or album, that can be because of your location too, If you are planning on Spotify Change Location, then here are 6 effective ways that will instantly get the job done or you, no matter where you are in the world.

Part 1: By-Passing geo Restrictions in Spotify

Before we find out about the 6 different ways to update location Spotify, let us understand why it is important to by-pass these geo-restrictions and what are these hindrances in the first place.

Region Specific Content

The main reason anyone would want to change their Spotify location is when they change countries. If you want to access content relevant to this new region, it is best to go with Spotify Change Country. When you change our spotify location, you will get the regionally most-played songs or most liked podcasts as suggestions. This way, you can access quality content of this place that you’ve shifted to.

Geo-Based Suggestions

Now, your coordinates can decide what kind of playlists Spotify compiles for you. The music streaming app can surprise its fans by bringing together some of the best songs from the region. Depending upon your location, only the most liked songs of that location are brought together. This makes life easier for those who like to listen to songs and content in their regional languages.

But is Spotify available everywhere?

How we wish this was true! However, Spotify is not available in all the countries. Though ts has decided to extend its services to most of the Asian and European countries, currently, it is available in roughly 65 countries only. By the end of 2021, it might be available in over 170 countries, Until then, tweaking location becomes important.

The problem with Spotify update location is that - you can only change your country when you installed Spotify in a particular country and then shifted to a new one. If you are trying to change location within the same geographical boundaries, it doesn’t support those actions. Also, the free users have to change their location manually while the Premium Subscribers can access the content available in all the Spotify Hosting countries.

Part 2: Best Tools to Fake GPS on iPhone

Most of the users want to make the best use of this tremendously efficient Music-streaming app. It is having a keen eye for quality audio and also hosts some of the best podcasts and content. To make that possible, you can use some of the best online tools to fake spotify location whenever you want. Instead of going for the regular Spotify Update Location, you can use these third-party applications to change the location on your iPhone devices (will reflect in Spotify too).

The Wondershare’s Dr. Fone is a very good application that lets you change location Spotify with a few easy steps. It hardly takes a few minutes and this is how you go about it-

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Step 1: Go to the official website of Dr. Fone - Virtual Location (iOS) and you will find the download versions for Mac, and Windows. Download and launch the application.

Step 2: Once you launch it, from the options displayed on the screen, go for Virtual Location (usually at the bottom).

Step 3: Then connect your iPhone to your computer and click on ‘Get Started’.

Step 4: A map with the coordinates of the entire world will appear. On the top right corner of the page, click on the third icon - Teleport Mode. Now, choose the place that you want to virtually shift to.

Step 5: Click on ‘Move Here’.

The new Virtual Location will display on your iPhone Location Settings as well and Spotify update location will also be the same.

The process doesn’t take much of your time and you can change your location any number of times that you want. Not only on Spotify, your other social media apps and location using apps will also record the new virtual location.

Cydia - Location Faker App

For the Spotify Change Region, Cydia’s Location Faker App is the perfect choice for iPhones. The software is also available in different versions to choose for your device model. You won’t need a computer for this and everything happens over your iPhone only.

Step 1: Download the Locationfaker version suitable for your phone. Locationfaker8 is available for the 8.0 version of iPhone.

Step 2: You will notice a map appear on the screen. You can either move your pin-point to the new location or enter the address or coordinates into the search box on top of the page.

Step 3: Once you settle with the coordinates, shift the ‘Off’ toggle to ‘On’. It is present at the bottom of the page.

Step 4: On the bottom of the page, in the same line as the toggle, you will find the ‘i’ icon. Click on that and several options will open. From there, choose ‘White List’. All the apps that need access to your new location will display. Search for Spotify and enable it.

Cydia - Location Handle App

To change spotify region, the Location Hanle App from Cydia might bring in more benefits than the usual location spoofing options. This is usually a very good choice for those people who play games and like to fool their friends with a fake location. However, for Spotify update Location, it still does a great job.

Step 1: You can download the Location Handle application either from their website or the app store. Wait till it completely installs.

Step 2: Now, the map tab will appear along with an option to choose from 4 location changing types.

Cydia - Location Handle App

• Normal Mode - Change the location to anywhere
• Offset Mode - Change to a location that is only a few feet away.
• Automatic mode - Change to a new location slowly, as if you were walking.
• Manual Mode - change to a new location by using the joystick to navigate.

Step 3: Here, we are learning how to achieve Manual Spotify Change Region. So, go with the Manual Mode

Step 4: Now the map will appear on the page, more clearly with the pin and a search box for entering coordinates will also display. You can update Spotify location there.

Step 5: The Joystick will show you the different directions and when you move it, your location on the map also changes. Settle on the one that best fits you and proceed.

Part 3: Best Tools for Fake GPS on Android

We have seen how to chive the Spotify Location update using the tools that work great in iPhones. In fact, you can use Dr. Fone on Android as well. Here are some other efficient GPS Faking tools that you can specifically use with your Tecno Spark 10Cs.

Hola Fake GPS

Hola Fake GPS is a direct Android app that you can use to change country on Spotify.

Step 1: In the Google Play Store, Search for ‘Fake GPS-Location - Hola’. The app appears with a smiley pin-point as an icon. Click on that and install on your Tecno Spark 10C.

Step 2: Now, a map will appear showing your current location in the world. You can shift the pin to a new location or simply type the address into search bar.

Step 3: The location pin will slowly start moving from current location to new location. At any point if you want to ‘STOP’, you can click on the Stop button that is present on the screen at this point.

Fake GPS by Lexa

This is a free app that helps to Change region Spotify within a few minutes. You can also use it for making some advanced changes if you are gaming or trying to access restricted content on other apps.

Step 1: Go to the Google Play Store and download Fake GPS by Lexa.

Step 2: Once you launch the app, the mp with your current location will be displayed. Enter a new location in the search box.

Step 3: The app will try to detect the new location that you have entered. Once it is successfully done, you will find that your new location will reflect in all the apps that have access to your Tecno Spark 10C’s location. Including Spotify.

Part 4: How to use a VPN to change Spotify Location?

The Virtual Private Network apps will change your server and your location and IP address will be masked completely. We suggest that you use NordVPN, that is quite easy to work with.

Step 1: Download NordVPN from the App Store or Google Play Store

Step 2: To change Location on Spotify, Sign Up and NordVPN will find the nearest server for you.

Step 3: If you do not prefer the server that they connected to you, disconnect from that server. You can update location on spotify using another server.

Step 4: Then go to ‘More Options’ > Servers > All countries and choose the country that you want. The same will reflect on Spotify too.

Conclusion

If you want to update location on spotify, then these are the 6 methods that you can use to change location in Spotify anywhere, anytime and any number of times. Avail all the benefits of this supreme audio application by choosing to be anywhere in the world ‘virtually’.

You Might Also Like

Location-based apps

GPS spoof for dating apps

GPS spoof for social apps

Pokemon Go on PC

AR game tricks

Change Phone GPS Location Easily

• ● Teleport GPS location to anywhere
• ● Play AR games without moving
• ● Spoof Location on the popular Apps

Try Now