In 2024, Does Airplane Mode Turn off GPS Location On Realme Narzo 60x 5G?

Does Airplane Mode Turn off GPS Location On Realme Narzo 60x 5G?

Airplane mode is a feature available on all smartphones and other electronic devices that stops the signal transmissions from the Realme Narzo 60x 5G devices. Also known as flight or airplane mode, this feature will disconnect the wireless functions, including cellular connection, Wi-Fi, and Bluetooth.

The feature’s name says that it was introduced to cut off any radio transmission during the flight to avoid any communication interference. However, the feature must be enabled while taking a flight, and if you need to be disconnected from the signals, you can even use the feature outside the plane.

If you have enabled airplane mode on your Realme Narzo 60x 5G or Android device and think it will also block your GPS location, you are wrong. Know why airplane mode does not turn off GPS location and other ways to avoid getting tracked with or without Airplane Mode.

Part 1: Does Airplane Mode Turn off location?

As we mentioned above, while you put your phone on airplane mode, the cellular radio, Wi-Fi and Bluetooth is disabled, but not the GPS location.

The GPS works on a different technology where the signals are received from the satellite and are not dependent on the network or cellular services. So, when the airplane mode is enabled, the GPS location is not turned off.

Part 2: Can Your Location Be tailed on Airplane Mode?

Yes, if you have not disabled the GPS feature, your location can be tailed on an Airplane mode as the flight mode only disables the cellular connection and Wi-Fi. So, it can be concluded that Airplane Mode is no solution for stopping the GPS tracking on your phone, though there are other workarounds available for this.

Part 3: How to Prevent Phones from Being Tailed?

The GPS feature of your phone, besides assisting you, is also a way any person or third-party app can keep track, which can hamper your privacy and be annoying. So, for privacy or any other reason, if you are looking for ways to prevent your phones from being tailed, check out the solutions for iDevices and Android below.

3.1. How to stop GPS tracking on Realme Narzo 60x 5Gs?

To hide the location on your Realme Narzo 60x 5G and iPad, below listed are the steps.

Step 1. Open the Control Center on your iDevice, iPhone 13 for example. (For iPhone X and above models, swipe down from the top-right, while on other devices, swipe from the bottom of the screen)

Step 2. Enable the Airplane Mode or turn off the Wi-Fi and Cellular icon.

Step 3. Next, you need to disable the GPS radio. On some of the Realme Narzo 60x 5G devices, there is a separate setting for this. Go to Settings > Privacy> Location Services. The list of the apps using the location services will appear. Move the toggle at the Location Services to turn it off.

3.2. How to stop GPS tracking on Android Devices?

The process to turn off GPS location on Android devices may vary from device to device and brand to brand. Still, the commonly used steps for turning off the location are listed below.

Step 1. On your Realme Narzo 60x 5G, swipe down on your screen to open the options list.

Step 2. Search for the Airplane icon and click on it to turn on the Airplane Mode.

Step 3. Next, open the App Drawer and then choose Settings > Location. Turn off the Location.

Part 4: Spoof Location to prevent GPS Tracing without Turning on Airplane Mode

If you are looking for a method that can prevent GPS tracking without turning on Airplane Mode, spoofing your location is a workable solution. To get this task done, you would need a specialized app or a tool, and here we recommend Dr.Fone - Virtual Location as the best option.

Using this excellent tool, you can set any fake location across the globe for your Android or iOS device, which will prevent you from being hacked. The tool works on almost all models and brands of devices and is quick and hassle-free.

Key features of Dr.Fone Virtual Location

Teleport to any location of your choice and set a fake GPS location.
Works with all iOS and Android devices,
Allows simulating GPS movement with the route.
Works with all location based-apps like Snapchat , Pokemon Go , Bumble , and others.
Available for download on Windows and Mac.

You can check out this video for further instruction.

Steps to spoof and set fake location on Android or iPhone using Dr. Fone-Virtual Location

Step 1. Download, install and launch the Dr. Fone software on your Windows or Mac system.

Step 2. On the leading software, tap on the Virtual Location option and then connect your Realme Narzo 60x 5G or Android device to your system using a USB cable.

Step 3. Click on the Get Start button.

Step 4. The software will open a new window, and your connected device’s actual location will be shown. If the location is not coming correctly, tap on the Center On icon present in the lower-right of the interface.

Step 5. Next, in the upper-right corner, click on the teleport mode icon. Next, enter the desired location at the upper left-hand side that you wish to teleport to. Finally, click on the Go button after entering the site.

Step 6. A pop-up box will appear to click on the Move Here button to set the selected location for the connected device. The place will appear on the app interface and the phone.

Part 5: People Also ask about Airplane Mode

Q1: Can An iPhone Be Traced While off?

No, it cannot be traced when an iPhone or any other phone is switched off. For example, when an iPhone is switched off, its GPS is not activated, and thus it cannot be traced.

Q2: Does Find My iPhone Work on Airplane Mode?

No, the Find My iPhone feature does not work in Airplane mode because the location services need a network connection, and thus in Airplane mode, the Realme Narzo 60x 5G device is offline, and it isn’t easy to track the Realme Narzo 60x 5G device.

Q3: Does airplane mode turn off life360

Life360 is a helpful app for tracking your friends, family, and other people. This app tracks your GPS location and displays it to all the selected members in a circle. When the airplane mode on your device is enabled, the network will be disconnected, and thus Life360 will not be able to update your location to the members in the circle. Therefore, during airplane mode, Life360 will not update your site.

Wrap it up

So, it can be concluded that Airplane Mode disconnects you from the cellular network and Wi-Fi. Therefore, to stop getting traced, you need to disable your location services along with the airplane mode. Using Dr.Fone - Virtual Location is an excellent alternative to stop the GPS location as the software will help you set a fake location, and your actual location will remain hidden from all.

safe & secure

How to Use Life360 on Windows PC For Realme Narzo 60x 5G?

Life360 is an online platform that utilizes geo-location services to help users share their real-time location with friends and family. The app allows people to create a family group and stay connected to each other through features like chatting, sharing location, sending safety alerts, etc.

As of now, you cannot run Life360 on computer as it is only available for Android and iOS. Why? Because as opposed to a PC, one can easily carry their device everywhere! It means whether your kid is stuck in traffic and needs your help or your parents have lost their way back home, Life360 will instantly send you an alert on your device.

However, that doesn’t mean you cannot use Life360 on a PC. While it may seem a bit odd, there are a couple of methods that’ll allow you to get the Life360 app for Windows. In today’s guide, we are going to share some of these methods that’ll help you run the Life360 app on Windows.

So, without wasting another second, let’s dive straight into the guide.

Part 1: Why people seek to use Life360 on PC?

First things first; why would anyone want to use a family locator app like Life360 on their PC? Well, the truth is everyone has their own reason to get Life360 for PC. For instance, let’s say you are in the middle of an important project and don’t want to be bothered by alerts on your smartphone. However, you still don’t want to compromise with the safety of your family members.

In this situation, you can simply run the Life360 app on PC. This will allow you to directly keep track of the whereabouts of family members on your Windows system and you won’t have to constantly check your phone.

Life360 can also be used on a computer when your phone’s battery has completely drained and there’s no power outlet nearby. In this case, you can simply power-on your laptop, start the Life360 app and send your current whereabouts to family members.

Part 2: Is it possible to use Life360 on Windows PC?

Life360 is an extremely useful app for people who are always concerned about their closed ones. The app is basically designed with a vision to keep family members connected and safe. In addition to location sharing, the app also provides exclusive features like crash detection, place alerts, speed alerts, battery monitoring, etc.

The app also makes it easier for parents to monitor their child’s movement. Using the app, you can always know that your kids have safely reached school and back home. For any parent, knowing whether the kids are safe, is one less thing to worry about.

However, as we mentioned earlier, Life360 hasn’t been released for Windows yet. So, there’s no direct way to install and run the app on a Windows PC. While Life360 may release a dedicated Windows software in the future, as of now, you can only run it using the alternative methods.

These methods include:

Part 3: Use Life360 on Windows PC with Android emulator

The first and the most convenient way to run Life360 on computer is to use an Android Emulator. An emulator is basically a software that creates a virtual Android system on your computer. As a result, you’ll be able to run Android apps on your computer.

While there are dozens of Android emulators, Bluestacks seems to be the most popular and user-friendly option among all. Unlike other emulators, Bluestacks is easy to set up and use.

Here’s how you can run Life360 on a computer using Bluestacks Android emulator./

Step 1: Head over to Bluestacks official website and tap the download button.

Step 2: Open the installer and tap the “download” button. This will initiate the download process on your System.

Step 3: Once the installation process completes, Bluestacks will start to boot. Keep in mind that the first boot may take some time, depending on your system configurations.

Step 4: In the home screen, tap the “Google Play Store” icon. You’ll be asked to sign-in with your Google account. Enter the right credentials and log-in to the Google Play Store.

Step 5: In the top search bar, type-in Life360 and tap the “install” button to download the app.

Step 6: Life360 is now installed on your computer. Open the app and enter your login details. You’ll now be able to run Life360 on your PC.

Part 4: Use Life360 by mirroring Android to Windows PC

While running an emulator is a great way to get Life360 on PC, it has its own set of challenges. For instance, running an Android emulator is not easy when you have a low-configuration PC. Emulators like Bluestacks requires high system configuration otherwise they take forever to load.

In this situation, we have another alternative for you to run Life360 on PC. You can simply mirror your Android to your Windows system. Mirroring the Android device will allow you to see its content on the PC itself.

Here’s how you can mirror the Android device on your PC.

Step 1: Make sure that Bluetooth is activated on both devices.

Step 2: On your Windows PC, open “Settings” and select the “Systems” tab.

Step 3: Choose the “Projecting to this PC” option in the left menu-bar and make sure that “Available Everywhere” is selected.

Step 4: If you’re running Android Pie or above on your device, scroll down to open notification drawer and select “Smart View” (or “Cast” in some devices). You’ll see your PC listed here. Tap the button to start Android mirroring.

Step 5: It may take some while for the connection to establish. Once it does, you’ll be able to cast your device screen onto your computer and you’ll be able to run life360 on your system.

Keep in mind that you’ll still require your device to navigate through the content on your computer. Any action that you perform on your device will be replicated on your computer screen as well.

Final Verdict

Life360 is probably among the top family locators for Android users. Apart from its extensive range of features, the app provides a user-friendly interface, which allows it easier for even elders to use the app without any issues. Even though there isn’t a dedicated Life360 software for Windows, you can follow the above-mentioned methods to run the Life360 on PC.

Location-based apps

GPS spoof for dating apps

GPS spoof for social apps

Pokemon Go on PC

AR game tricks

Change Phone GPS Location Easily

● Teleport GPS location to anywhere
● Play AR games without moving
● Spoof Location on the popular Apps

Try Now

Full Guide to Fix iToolab AnyGO Not Working On Realme Narzo 60x 5G

If you want to go anywhere in the world without moving an inch from your home and wondering how to change location on your iPhone, then iToolab AnyGO is the app for you. Not literally, but it allows you to teleport your current location anywhere around the globe. It is considered the most famous and widely used GPS spoofing locator, which offers various options than merely faking your current location.

It also allows you to simulate GPS movement, which helps you play games after importing GPX route files. You can use a joystick or keyboard to simulate easily anywhere. But users of this app are experiencing some technical problems and improper functionality and hence can not seem to get on with it. And if you are among those unlucky guys and wondering if iToolab AnyGO not working, how to fix it? Then you’re at the right place.

In this article, you will get to know exactly how to fake location on iPhone and fix iToolab AnyGO when it is not working. Though there are numerous problems that users are complaining about, here you will know the most common problems faced by many users. So stay tuned.

Part 1. What is iToolab AnyGo?

This app is a GPS spoofing app that changes location on iPhone anywhere around the globe. But the fun part with this app is that now you can gain access to the location-based games and apps that you normally could not access. This opens gates to endless possibilities where you can watch any TV show, download any location-based app, and play games. In short, this app removes any geo-based restrictions on you without jailbreaking your phone.

Here are some prominent pros of the app in a nutshell:

Spoof GPS location on your iPad/iPhone with jump mode.
Change locations multiple times.
Works perfectly with geo-based games like Pokemon GO.
Play AR games naturally.
Enable 2-spot or multi-spot movement or follow the GPX route.

And here are some of the drawbacks:

It is difficult to change locations multiple times and your account may also suspend.

Part 2. How to fix the iToolab AnyGo not working issue?

Issue 1: The map does not appear in the program

First, check your network connection if iToolab AnyGO doesn’t show on the map. Then, if the internet is available, download the latest iToolab AnyGO. You can check it out by clicking the menu and hitting the “Check for updates” button. Alternatively, you can uninstall and re-install AnyGO to acquire the latest version.

Issue 2: iPhone/iPad unable connecting AnyGO

Follow these step-by-step guides if your iPhone/iPad cannot connect with iToolab AnyGO.

Try to re-plug and unplug your device, and connect again after restarting the program.
Also, try different USB ports and original USB cables, as maybe there’s an issue with the USB connection.
Also, make sure that your computer and your device are correctly connected. If not, then iTunes cannot detect your device.

Note: Make sure that your iOS version should be compatible with AnyGO. iOS 8 or the latest versions ensure compatibility.

Issue 3: AnyGO repeatedly crashes

If this issue still exists, try to re-open the program again and again. If crashing continues, send program log files to the support team.

For Mac:

Head to the top menu of Mac and click Go, then click the Options button over the keyboard. A drop-down menu will appear with library options. Go to library>logs>Diagnostic reports and find log file”iToolab AnyGO” for mac crash.

For Windows:

On AnyGO, Go to the installation path. Locate the log folder and compress it before sending it to the support team.

Tips: iToolab AnyGo still not working? Switch to Dr.Fone - Virtual Location for seamless and reliable location simulation. Say goodbye to issues and enjoy hassle-free location control. Try It now!

Part 3. Best iToolab AnyGo Alternative Program You Can Use in 2024

If you are searching for an alternative app to the iToolab AnyGo, look no further and check out the Dr.Fone - Virtual Location . It is similar to other GPS spoofing apps but promises a smooth, natural, and realistic simulation of any GPS location.

Games are always fun playing with joysticks. And if you play games like Pokemon GO with it, you will experience better and seamless control over your Pokemon character in the simulation.

The app has a low detection rate which prevents you from jailbreaking and avoids getting your account banned. The developers are always alert and constantly updating the app, so you get the most benefit from Dr. Fone Virtual Location. In addition, it is highly compatible with devices running the latest version, so you do not have to worry if the app will work on your device if you are running iOS 17 or Android 12 or later versions.

One great feature that Dr. Fone Virtual Location consists of is sharing your fake location with your family. So you can play pranks with them and have a great time. You can also connect with new friends and get to know their whereabouts.

So much of the talk. If you are wondering how to use Dr.Fone - Virtual Location app? Here’s what you should know. Follow the below step-by-step guide:

How to use the joystick for flexible and smooth GPS control

The joystick feature is located in the teleport option at the upper-right corner in the 5th location.

How to simulate movement along the route using 2 spot location

Go to “One-Stop mode” at the corner on top.
Select the spot on the map you wish to go. The pop-up will tell you how far it is.
Drag the slider to select how fast you wish to move. Choose between cycling, walking, and driving. Let’s take cycling for example.
Enter a number to decide how many times you want to cycle between the two locations. Now click “Move Here”. Your character will start moving.

How to export and import GPX location

Click the export button to store the path as a GPX file
Import the shared GPX file to your Dr. Fone Virtual Location.
Download it from another website. Now click the “Open” button.
Wait some time to complete the import process. Once done, it is now ready for use.

How to teleport anywhere around the globe

Firstly download the Dr. Fone Virtual Location app. Though the app’s current version has an old interface, the functionality is cleared from any glitches. The latest interface will soon be available. Now click on the “Virtual Location” from the options and connect your Android/ iPhone to your computer, and hit “Get Started”.
Now in the window, find your existing location on your map with the help of the “center on” icon, which is located on the right sidebar. You will go to your current location upon clicking.
Now hit “teleport mode” at the top right. Enter your desired teleport located and hit the “Go” icon. Let’s visit Rome for this example.
You have successfully teleported to Rome. Click “Move Here”
Now your location is fixed to Rome.

How to add your route as a favorite

On your virtual location screen, click on the five-star beside the route and add it to your favorite.
Once you have added, hit the five-star icon again at the right-sidebar and locate the route you wish to use. Now hit the “Move” button and start walking along your favorite route again.

How to simulate movement along the route using multi-spot

Choose multi-spot mode at the top right corner.
The left sidebar tells how far it will travel to reach the location. Now set the moving speed and specify the number of times to cycle between the locations. Now click “Start Moving”.

You can watch the video below to fix iToolab AnyGo not working

Conclusion

If you are experiencing issues in the app and thinking iToolab AnyGo not working how to fix it? This is the answer. But if you are looking for an alternative, look no other than Dr.Fone - Virtual Location (iOS/Android). The app is very easy to use, teleports you in one click, and lets you use any location-based apps and games that are otherwise impossible to play.